Zap Products Plasti-Zap Brush-On CA (Orange Label) 1/4oz # PT-102

MEDIUM VISCOSITY FORMULA

CURES CLEAN AND CLEAR

WILL NOT ATACK PAINT

WORKS ON MOST PLASTIC AND VINYL

NON-FLAMMABLE

Uses: PLASTI-ZAP is a specialty CA adhesive developed for use on plastic and vinyl items. Most plastic modeling projects can be assembled with PLASTI-ZAP and very small amounts of ZIP KICKER. The special formula in PLASTI-ZAP allows it to screen out any mold release agents resulting in a permanent bond in 15 to 30 seconds. The joint can be filed and sanded in a minute or so, allowing extra fast assembly.

Helpful Hints: Apply small drops of PLASTI-ZAP to one surface only then mate the parts. For large or long seams apply small drops 1/4 to 1/2 inches apart, one side only, along the entire seam, then join parts. Be careful to keep your fingers away from the glued joints until cured, this glue will bond your skin instantly to your model. For bonding chrome parts, scrape the chrome off of the bonding areas then apply the glue to one side only. If you want to use ZIP KICKER, apply very small amounts with a fine brush or tooth pick. You do not need to apply kicker to the entire joint. For critical applications test sample joints for designed strength requirements.