Force 8 Half Mask Twin Respirator with Typhoon Valve # FM-F8-A1P2

Force8™ Half Mask with Typhoon™ Valve comes supplied with twin cartridge A1P2 filters in a hang bag.

For health and safety during airbrushing or spray-painting, any liquid or particles atomised in the air should not be going down into your lungs - especially solvent-based paints, but even if the paint is water-based and non-toxic. These masks fit comfortably and are affordably-priced so there is no reason to take unnecessary risks with your health while painting.

Features of the Force8™ Half Mask with Typhoon™ Valve:

• Superior low breathing resistance
• Fully-adjustable 4-point suspension harness with quick release buckles
• Durable thermoplastic rubber offering a superior fit to most face shapes comfortably
• Low profile angle of filters for minimum visual impairment
• Reflective strips create increased visibility in low-light environments
• Replaceable filter cartridges
• Conforms to EN140
• Force 8 Half Mask with Typhoon Valve and Twin filter cartridges

A1P2 cartridges are suitable for protecting your respiratory system from:

• Solvent-based painting
• Water-based painting
• Rubbing down paint
• Paint stripping
• White spirit
• Welding (ferrous and lead)
• Organic vapours and gases
• Dusts
• Mists
• Fibres and fibre glass
• Plaster
• Wood (hard and soft)
• Nuisance odours

Conformity:
The filters confirm to EN140 (Face piece), EN14387:2004 (Filter performance), EN143:200 (Filter performance).